First: the bottom wheel of the printing machine, when cleaning the rubber on the countertop, avoid the glue on the bottom wheel. After cleaning, check whether the bottom wheel has adhesive glue. If there is a dry rag, apply it, otherwise Directly affect the accuracy of the printing;
Second: the air source processor on the garment printing machine needs to shut off the air twice a day; the aerosol oil is adjusted to 4-5 drops per minute, and the gas should be shut off when refueling;
Third: emergency stop switch, in the process of use, the emergency stop switch on the printing machine should be used as little as possible to avoid the impact of the chain, the drag chain and the synchronous belt.
Fourth: the optical axis (machine movement part), butter twice a week;
Fifth: joint head, can drop butter (one week / time, 10-20g), engine oil (1-2 drops, 3 days / time).